Samsung Galaxy Tab A (2019) SM-T510 Wall Mount

cults3d

Wall mount designed for the 10.1 inch 2019 Samsung Galaxy Tab A (model number SM-T510). Primarily intended for use as a dashboard with home automation systems such as Home Assistant, Hubitat, ActionTile etc. Designed to use a readily available 90 degree USB-C Cable (UGREEN) and hide the cable from view. A spacer allows the tablet to 'float' away from the wall, while allowing the USB cable to enter a wall box. Mounting holes are provided for direct attachment to both UK (60mm hole spacing) and US (83.34mm hole spacing) single back boxes with additional mounting holes for screwing directly to a wall if needed. There is also an extension to the power button, allowing the tablet to be shut down/restarted while in the mount. WARNING - YOU NEED A BIG PRINT BED!!!! You will not be able to print this design on an Ender 3 or similar printer. Minimum bed size requirement is 273mm (without skirt lines). All prints in the images were produced on a Creality Ender 5 plus but they will quite happily fit on a CR-10 or other printer with a 300mm print bed. CHECK YOUR PRINTABLE AREA BEFORE BUYING - WE WILL NOT PROVIDE REFUNDS IF THIS DESIGN IS TOO BIG FOR YOUR PRINTER - YOU HAVE BEEN WARNED Two styles of front frame are included. Full Frame: This has a window cut out for the screen and an additional hole for the camera. Thin Frame: Minimal width frame There is no difference in overall size. Some people prefer the thinner outer frame.