SANYO CRT TV FXTG Remote Control Holder

prusaprinters

<p>A remote holder for "old school" SANYO TV remotes circa mid-2000s. This will not work for all SANYO remotes. This could work with other remotes, both SANYO and non-SANYO, as long as they fit within these dimensions:</p> <ul> <li>Between 30.5 and 46.5 mm wide.</li> <li>Less than 18 mm thick including button thickness. (Can exclude button thickness if the entire button layout is horizontally centered and the width is under 30.5 mm.)</li> <li>Over 77.5 mm tall.</li> </ul> <p>For reference, my remote model is "FXTG" and my TV model is "DS20424". Attached to the side of my TV with double-sided foam tape.</p> <p>Printed with two walls and 20% infill.</p> Category: Electronics