Sapphire Pro BTT 12864 Mini LCD adapter and display case

thingiverse

Hey guys, cause I upgraded my Sapphire Pro to a SKR 1.4 Turbo I wanted to use the BTT 12864 Mini LCD and made this design. Make sure that your printer is calibrated because I designed this to be a tight fit. Everything can be printed without supports. Hardware you need: - 4x M3x6 screws - 4x M3 washers - 4x M4 washers - 6x M2 threaded brass inserts - 4x M2x8 screws - 2x M2x12 screws - 6x M2 washers Mounting instructions: First you need to melt four M2 inserts into the adapter and two inserts into the bottom housing of the display. Then the adapter has to be mounted into the housing of your Sapphire Pro. Use the four M3x6 screws with doubled washers (M3 and M4 - see picture). After these steps you can mount the housing with two M2x8 screws onto the adapter and put the display in. The display is secured with two M2x8 on the left side and two M2x12 screws on the right side. The front cover is only clipped in place. Have fun and let me know in the comments if you have problems or suggestions!