Satsana for Ender 3 - CR Touch Steel Bracket & Micro Swiss Direct Drive

thingiverse

**Update July 2022: I have added a file which features lowered ducts. This prevents the part cooling from aiming too high, at your nozzle.** If you have a CR-Touch, the Satsana remixes that have the integrated BLTouch mount will NOT work! The position of the wiring connector is right between the 2 mounting screws. This is also for the Ender 3 V2 using the Micro Swiss Direct Drive. I remixed this because I don't like using a printed mounting bracket for the ABL probe. When printed on its back, the layers are not in an ideal orientation to take shear loads (however small) that the probe will impose on the mount. Also, PLA and PETG will creep and deform over time, affecting your Z offset accuracy. So this uses the steel bracket that came with your CR-Touch. You will need the bracket for the original Ender 3. Even if you have a V2 model, you need that other bracket. Good news: remember how your CR-Touch kit came with multiple brackets? This is one of them - hope you didn't toss them. There is a cutaway in the side of the shroud to avoid clash with the sensor housing. You simply sandwich the steel bracket between the carriage and this shroud, there are recesses in the model. In addition, I've left the outboard strain relief tab from the original Satsana model. This will not clash with the Micro-Swiss direct drive and I added holes for you to get a zip tie through.