Scan and Print Of me

pinshape

Scan was taken with FUEL3D Printer, which is a Gigabot. Filament used was 3mm White PLA, and the layer thickness was set to .1mm. The print orientation was from top of head to chin vertically, and supports were provided throughout. Bed temperature started at 65 degrees Celsius for the first 30 layers before being reduced to 45 degrees Celsius. Hot end temperatures ranged from 190 to 185 degrees Celsius. Print time was approximately 28 hours, as I intentionally ran the printer at 50% speed to ensure everything went according to plan. It's likely that it could be printed faster with increased speed.