Scandinavian" style coffee table leg support.

cults3d

3D modeling of a "Scandinavian" style coffee table inclined leg support. The inclination of the support is 10°. Plan to buy insert for plastic M8 for fixing the table stand (~12€ for a set of 20 pieces on Amazon). The hole in the bracket for the insert is Ø9.6mm. If you have a table stand with a threaded rod other than M8, pay attention that the nominal outer diameter of your insert matches with that of the holder hole. In case this is not possible, you will just have to modify the STL file directly. WARNING: when cutting the STL file, you will have to define a sufficient wall thickness for the attachment of your insert. In my case; M8x12,7 and Ø10,1 mm (Ruthex brand) given for a wall thickness of 4,5 mm minimum. Be careful to also match the type and pitch of the insert thread with that of the table leg threaded rod. Do not overtighten the table leg on its support, risk of tearing off. Contact + ¼ turn. It remains a printed plastic material... Good printing!