Screwless BTT TFT35 E3 V3 Mount Ender 3 Pro

cults3d

Designed myself a screwless TFT35 screen holder which slots onto the V-Slots on my Ender 3 Pro. There are screw holes within the design if anyone really wants to use them but they are not necessary. Once printed, push the 2 screen cables in through the back of the base first before fitting to the screen. Then place the screen in the base, it is a bit tight but will go in. Next, slide the mount on to the V-slot (perhaps try a dry run first?), once that is on, then place the front cover over the screen. It should slot over and squeeze down. I have allowed for the curves and to fit under the cover without squeezing and stopping the screen working. The reset button is longer than required but can be trimmed to suit personal choice. I have mine just as a cover and remove it and use a pen to reset if required. Print orientation as the black version in the picture. 5% fill is all that is required. The hardest part is removing the excess fill from the V-slots but they do come out eventually. Happy for anyone to remix... Only been 3d printing a month or so, so a newbie. hahaha. Edit: Version 3 is a new version with holes for all Uarts and cables. Have put a small slot in the front support behind base for cables and wires to be push through to the back. The fit is as close as I can possible get. All comments welcome, well all good comments. Edit 2: Someone wanted a left hand version so now there is one. Not printed it myself but should work.