SCX24 Light Buckets

thingiverse

These are light buckets for the 3mm LEDs that come with the SCX24. I wanted to put lights back on my truck after putting my new bumper on. They work with both the Deadbolt and Jeep bodies. TO INSTALL (Please note that the sticker and body may be damaged when installing. I tore through the corner of the body and the part of the sticker where the lights are.) You'll need: -Glue -A thin, clear piece of plastic -(Optional) Silver paint or a silver marker -A drill or body reamer You can color the inside of the bucket silver. I used a silver Sharpie. I designed a small, square indentation in the front of the bucket. You can cut a small square of clear plastic and glue it there to be the lens. Make holes in the body. I used the sticker as a reference point to drill the holes (I do not have a body reamer). If using a drill, be careful as there is not much material around the lights. I recommend starting off with a small drill bit and gradually working your way up until the hole is big enough. Line up the bucket with the drilled hole and glue it on. Glue the LEDs in the back of the buckets.