SD Storage - Multiple Layer - SD, Mini & Micro

prusaprinters

<p>expandable SD card storage for SD, Mini and Micro.</p> <p>This model is compatible with my Nozzle Storage as well "Nozzle Storage - Multiple Layer - V6".</p> <p>The Premade G-Code is at set matching the pictures.</p> <h3>Print instructions</h3><h3>Models</h3><p>There are 3 model types, <strong>Bottom</strong>, <strong>Layer</strong> and <strong>Top</strong>.</p> <p>The <strong>Bottom</strong> and <strong>Layer</strong> models come in 4 different types each fitting a specific SD Card size. To make a SD Storage unit you only need 1 <strong>Bottom</strong> and you can make for any SD card size you wish. The <strong>Layer</strong> models you can print as many as you want depending on how many SD card you need to store, and you can always add a new layer to your unit.</p> <p>The <strong>Top</strong> you also only need 1 of, and there are 3 to choose between, <strong>Smooth</strong>, <strong>Text</strong> and <strong>Figure</strong> depending on how you would like the unit to look.</p> <p><h3>Printing</h3><br/> If you use the standard setting for <strong>PLA</strong> on a PRUSA printer, all the models can be printed without support, however you might want to use support if you print in <strong>PETG</strong>.<br/> I recommend layer height at 0.20 or smaller as this will make the thread nice and smooth.</p> <p>That is all you need to know, good luck.</p> <p><strong>Happy Printing!</strong> and don't forget to upload a picture of your result!</p>