SE_450_24 BLV Bottom Holder
thingiverse
I am building a BLV-MGN-Cube. Part of the original design is fixing all electronics on a thick sheet plate of any material. I want the plates to be mandatory and instead will use the profiles that the frame provides to fix all different electronics on. I couldn´t find an attachment for the MeanWell SE-450-24 power supply from the BOM so i designed my own. It is designed to fit on top of the two 2020 profiles that define the electronics-section of the printer. The part is 100mm long, 30mm wide and 20mm high, you will need two as seen in the photos. It is not a tight fit on the power supply so you will need some screws. You will need also: - 8x m5x10 button head screws - 8x m5 t-nuts - 8x m4x10 sockethead screws I printed the mount in PETG with 3 shells and 65% infill because i printed all my blv-mgn parts that way. I think less infill will work too, but the power supply will bend the part down if it is not enough. STEP and SCAD file are provided so feel free to optimize the part for your belongs.
With this file you will be able to print SE_450_24 BLV Bottom Holder with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SE_450_24 BLV Bottom Holder.