Seasons: unsleeved card deck boxes

prusaprinters

<h3>Introduction</h3><p>I quickly designed these boxes to hold all the (unsleeved) cards of Seasons (base game + Enchanted Kingdom and Path of Destiny). They fit inside the box insert, and make sure cards don't get all mixed up in transport or when storing the box vertically.</p><p>Both boxes come with two compartments:</p><ul><li>the base game box (the thicker one) can be used to separate the cards used for beginner games (#1-31) from the remaining cards used in full games;</li><li>the expansions box allows to separate the decks of the two expansions.</li></ul><h3>Build instructions</h3><p>I just printed this with PLA, 0.4 nozzle and “0.20 (Quality)” PrusaSlicer profile. No supports and 15% infill (the latter does not really affect the print as all surfaces are just a few layers thick).</p><h3>Printing tips</h3><p>In my prints, the bottom holes to help push the decks out of the box had some minor quality issues, and I needed to sand them down a bit, just to make sure not to ruin the cards when putting them inside the box.</p><h3>Sources</h3><p>I designed this in OnShape as a <a href="https://cad.onshape.com/documents/b2f15ed8aaa3fe048430b44f/w/2e7a28edeef1881247994453/e/2822992a545238b87dcba752?renderMode=0&amp;uiState=6249c32fd0c7bc7721717037">public document</a>. Feel free to remix it (CC-BY-NC-SA 4.0): the design is mostly parametric, so it should be easy to account for, e.g., sleeved cards (although I am not sure a solution in 2 boxes still fits inside the box.</p>