Sebo Felix shoulder strap insert

prusaprinters

<p>If you own a Sebo Felix / Sebo Dart (or Karcher CV300/CV380 / Windsor Axcess in USA), you can remove the cleaning head and use the vacuum as a canister cleaner. Sebo sell a shoulder strap (part 7158) that connects onto the bottom of the cleaner body where the cleaning head would connect to, but...</p> <ul> <li>It is not sold by Sebo UK, only Sebo Germany and USA</li> <li>It sells for £35!</li> </ul> <p>So I have printed my own, based on measurements from the different heads that can attach to the cleaner body.</p> <p>The other end of the strap attaches to the tool holder on the handle. I found strong cable ties work well to attach the strap to the handle end of the cleaner. The printed adaptor has a slot for threading a strap through but a strong cable tie can be used instead, depending on the strap you can find.</p> <h3>Print instructions</h3><p>Printed in black PLA, 40% Infill, no support needed.</p> <p>Print catch dowel pin with brim if it falls over during printing.</p> <p>A short 10mm spring works well for the catch mechanism.</p>