SeCopter 250 - Quadcopter Frame V1.0

prusaprinters

<p>First version of my 3D Printed Quadcopter frame. The configuration is currently for the parts which I still had laying around at home:</p> <ul> <li>KK2 board (<a href="http://www.hobbyking.com/hobbyking/store/__54299__Hobbyking_KK2_1_5_Multi_rotor_LCD_Flight_Control_Board_With_6050MPU_And_Atmel_644PA.html?strSearch=kk2">http://www.hobbyking.com/hobbyking/store/\_\_54299\_\_Hobbyking\_KK2\_1\_5\_Multi\_rotor\_LCD\_Flight\_Control\_Board\_With\_6050MPU\_And\_Atmel\_644PA.html?strSearch=kk2</a>)</li> <li><p>Multistar Motor and Afro ESC set (<a href="http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=76071">http://www.hobbyking.com/hobbyking/store/uh\_viewitem.asp?idproduct=76071</a>)<br/> Since the weather is currently bad I did not yet have the chance to fly it outside. Indoor test flights were performed and very successful. The goal for this design was to create a very stiff but light frame. Currently the design might still be a little overkill but I will optimize that in future designs. The landing gear is snap on and should not damage the frame in a crash.</p> <p>The current total weight including a 1200mAh battery is 460g.</p> <p>If you have suggestions, wishes or comments just let me know.</p> <h3>Print Settings</h3> </li> </ul> <p><strong>Printer Brand:</strong></p> <p>RepRap</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Mendel90</p></div><strong>Resolution:</strong></p> <p>0.2mm</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>15%</p></div></p> <p><strong>Notes:</strong></p> <p>In order to increase the stiffness have at least 0.5mm of solid top and bottom solid thickness. I used 3 layers for my 0.2mm print.</p> </p></p> Category: R/C Vehicles