Selfie light support for FLSUN Super Racer

thingiverse

Not really a remix but i took the idea for the support from the original file. I bought a selfie circle light to install it in the dome of my Flsun Super Racer. I checked Rudmar solution but despite having arc etching in the back the ones in my light are ways (ways) tinier, so i had to remodel it from zero. I did it on Onshape. The "Support" has (for my light) to be printed at least 3 times. On the back there are enough holes (for M2.5 screws) to be sure to be able to fix it on the top. The supports, on the other side, just snaps in the etching in the back of the light without need of screws or glue. I also modeled a "Remote Holder": it can be fixed to the profile using M3 screws (you can print those brilliant adapters: https://www.thingiverse.com/thing:3050607 ). To power up the light, instead of going to a buck converter i just plug the USB cable that comes with it on the USB port in the back of the SR (or you can plug in one free port of a Raspberry PI if you use OctoPI or Klipper).