Servo Tilt Mechanism for Nano Talon

thingiverse

<p>Servo Tilt Mechanism for the ZOHD Nano Talon. I designed this mechanism to mount the Caddx Turtle V2. It is able to tilt downwards slightly more than 90 degrees, and upwards a few degrees so that the camera is protected during launch.</p> <p>When building, the length of the servo rod used to connect the servo arm to the camera mount should be as close as possible to 32mm length (center core to center core), so that the movement momentum is spread as efficiently as possible.</p> <p><u>If you found this useful, please consider to buy the needed parts through my affiliate link (or make any purchase at the website below after visiting these links)</u>:</p> <p><b><a href="https://www.banggood.com/custlink/mvKdHGGi6A">ZOHD Nano Talon</a></b> This is the plane that I designed this tilt mechanism for<br /> <b><a href="https://www.banggood.com/custlink/GmDYPGvSUk">Caddx Turtle V2</a></b> I designed the mount to fit perfectly with this camera<br /> <b><a href="https://hobbyking.com/nl_nl/hxt500-micro-servo-0-6kg-0-08sec-6-2g.html">HXT500 Servo</a></b> Servo used during this build. It is about as small as could possibly fit in here.<br /> <b><a href="https://www.banggood.com/custlink/3DvvUMUZAS">Hex M2 8mm Self Tapping Screws</a></b> - Make sure to get a whole variety of these screws. They are neat to use with 3D printed parts and I use them on all my designs</p> <p><b>Flight Footage </b><a href="https://youtu.be/KCSlDoLYrEk">here</a></p>