SET OF BRACKETS FOR CYCLING ACCESSORIES

cults3d

With this kit you can have all the accessories of your favorite activity well organized and in a small space. It features: shoe holder with mountain design, holder for different Garmin models, storage box for other accessories such as lights, glasses holder and helmet holder. Holder for Garmin: It is composed of two pieces that are subsequently joined together with contact glue. The larger piece can be printed without supports with the parameters: 0.2 layer height and 10% fill density). The small part requires only the supports touching the hot bed (layer height 0.1 and 10% infill). Support for glasses: Print without supports at 0.2 or more layer height (depending on printer). Support for helmet: Consists of two pieces to prevent the helmet from slipping once hung and to be able to fit most helmets on the market, avoiding the creation of brackets. Although it requires brackets on one of the pieces, these do not have to be removed as they are hidden. It is recommended to fix the piece-top with contact glue. Layer height 0.2 and 10% filler. Support for slippers: In my case it did not require supports since I used 0.15 layer height and thus avoided adding them in the overhangs of the circular perforations that the piece has. Silhouette and storage box: The silhouette does not require supports and can be printed at 0.2 layer height. The box requires supports in the triangular perforations, but they can be reduced to a simple central column. To do this, increase the x-distance of the supports (0.2 layer height). The pins that allow to attach the silhouette to the box or any other perforated surface, have been printed without supports at 0.2 layer height. Print specifications may vary depending on the printer used. You can leave any queries via messaging and I will try to resolve them as soon as possible.