SFP+ Cable Keystone Jack

prusaprinters

<p>A keystone jack to hide the hole in your patch panel if you're passing a SFP+ module (or other cable) through one of the keystone slots.</p><p>&nbsp;</p><p>The center hole is 4.75mm in diameter, but there are <i>.f3d </i>and <i>.step</i> files available if you have a thicker cable or need a larger hole for another kind of cable.</p><h4>&nbsp;</h4><h4>Usage</h4><ol><li>There is an overhang in the <i>hook</i> slot on the <i>left</i> and <i>right</i> printed parts. Clean up with a knife if required. This is not visible when installed, you just need the hook to fit.</li><li>Pass the SFP+ module through the keystone hole of your patch panel</li><li>Insert the printed <i>hook </i>in the <i>left</i> or <i>right</i> printed part</li><li>Connect the <i>left</i> and <i>right</i> printed parts with the cable going through the slot in the middle</li><li>Click the keystone jack into your patch panel</li></ol><p>&nbsp;</p><h4>Printing Tips</h4><ul><li>Do not rotate the parts</li><li>No support required</li><li>Use low infill to save plastic</li><li>The sides are not visible, so use big layers to save time</li><li>Try ironing for a smooth look on the visible surface</li></ul>