Shaped Projectile Barrel Plug
cults3d
Shaped Projectile Barrel Plug This is based around a 1 inch 10/32 set screw. You will also need 1/8 inch shock cord approximately 28 inches long. Top: print in PETG or PLA+ the smaller the layer better the print. Currently printing on Prusa mini+ at .10 layer with 7 walls all way around. 20% infill. Bottom: same as the Top but 10% infill. Plug: This can be printed as same as others. However I also suggest TPU if concerned about I.D. of barrel. Instructions: Screw set screw into "Top" once tight add "Bottom" once snug.....Add plug. Set screw should be seen just a tiny bit through the 1/8 shock cord hole. If not take Allen key through the back of the "Plug" and adjust. Run Shock cord through hole then tie bot ends in a knot.
With this file you will be able to print Shaped Projectile Barrel Plug with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Shaped Projectile Barrel Plug.