Shelf Bracket, Topologie Optimized

prusaprinters

<p>A strong and stiff 3D printed shelf bracket.</p> <p>This Shelf bracket is optimized to achieve maximal stiffness and strength while using minimal material. This ensures there is minimal stress concentration in the part.</p> <p>the brackets are flat on the sides to increase printability in the print direction that maximizes part strength.</p> <p>150 mm x 150 mm x 20 mm at 100% scale. Fits most build platforms and is very scalable if needed.</p> <p>holes might need to be drilled out a little to fit the screws</p> <h3>Print instructions</h3><p>Can be printed with all common FDM print materials such as PLA, PETG, ABS, ASA, etc.</p> <p>print with medium amount of infill (ca. 25%) and increase the amount of wall-, top- and bottom layers to increase strength using minimal material.</p>