Shower head adapter (for small gap holder)

prusaprinters

<p><strong>The problem:</strong> I have changed the shower head in our shower (simple task... or not after all)&nbsp;</p><p>Unfortunately, the new shower head has a different angle and the existing holder could not be brought into the desired position, so I got constantly floddings in the bathroom as the water jet came to a position where rails of the shower wall are mounted.</p><p><strong>The Solution:</strong><br>Now I could either replace the complete holder system on the wall or the head (in the hope that I find one that has the desired angle).</p><p>&nbsp;<br>When I saw the model of Kiytan I thought, now the solution is found. However, it turned out that the model was not usable (for me and my problem) because it is intended for a bracket with much larger gap. Therefore, I adapted &nbsp;it with a spacer so that it now also fits on a wall mount with the smaler &nbsp;gap.<br>Nevertheless because of the design / idea all credit goes to <a href="https://www.printables.com/de/social/283228-kiytan">Kiytan</a>.<br>&nbsp;</p><p>Material: PETG<br>Nozzle: 0,4<br>Layer height: 0,16 (wlórks also with 0,2)<br>Infill: 10%<br>Print speed: &nbsp;45mm/s<br>Print time: about 2 hours because I print slowly</p><p>&nbsp;</p><p>UPDATE:</p><p>The wall thickness has been increased and the connecting piece reinforced. When printing with PLA, deformation can still occur in the long term, so I recommend PETG.</p><p>&nbsp;</p>