Shruggie McShrugFace (Shrugman) Desk Thing (SPLIT) with STEP File

prusaprinters

<p>This is a split and keyed version of the Shruggie McShrugFace (Shrugman) Desk Thing (with STEP file).</p> <p>The key is going to be a tight fit with 0.3mm clearance all around and 0.5mm clearance front to back. I also uploaded a smaller version of the key which is 0.4mm shorter in width to accommodate some poor bridging in the key slot if that happens. I used the normal key and it snapped together tightly with it, so I may not even glue it up.</p> <p>Original here:</p> <p><a href="https://www.thingiverse.com/thing:2770145">https://www.thingiverse.com/thing:2770145</a></p> <p>Parts are not oriented for printing, they should need no supports. if you have a direct drive, you can likely get rid of small scraps of black filament, since the black parts of the print only require about 1.1m of filament (as designed).</p> <p>If you print one, please post a make, or whatever.</p> <p>¯_(ツ)_/¯</p> <h3> How I Designed This</h3> <p>This was designed with ViaCAD V9</p> Category: Sculptures