SiaCoin (SC) Cryptocurrency AltCoin Coin Token

thingiverse

A coin/token to represent/promote the cryptocurrency, SiaCoin. Can be printed with a single extruder with the logo and name cut out (sunken into the coin) or as a Dual Extruder print with the logo embedded into the coin in a different colour. The outer ring is printed separately and the coin is pressed into that after print (no glue required it is a tight squeeze). I usually use a hammer to get it inside the ring and then to adjust it slightly to get it centred. I would recommend scaling the outer ring up by 1% to make it even easier to get it in. I have included a file to just print the name and logo if you want to use that anywhere else, but if you just want to print the coin there are two options: 1.Dual Extrusion: Add the two 'DualEx' files to the one print, make sure they are lined up and pick your colours. Then print the outer ring (scale up by 1%) and push coin in the ring. 2.Single Extruder: Print the 'Coin-Sunken-Logo' file and then print the outer ring (scale up by 1%). Push coin into ring. Both options have the SiaCoin logo on one side and the word Sia (with the logo as the A) on the other side.