Sideway Radiator Mounts for Thermaltake Core Case

thingiverse

Mounts so that a radiator for water cooling can mounted sideways in a Thermaltake Core P5 case (may work on other Core cases). The spacing for these mounts are for a 80mm thick rad and fans only on one side. Unsure if a 60mm thick rad and fans on both sides would work. The mounts used the M3 screws the fans came with for the fan side, shorter M3 screws (aim for about 5-10mm thread length) on the non fan side. M5 hex head bolts were used to join the mounts to the case with a washer and nut on the back. Each mount uses 2-OFF M3 screws and 3-OFF M5 bolts. The holes in the print were cleaned up with a drill bit before install These mounts are overkill and just 2 securely held the radiator when full. I have noticed some have cracked since installed. Unsure if the print wasn't full cured or it was brittle. Maybe print at +1% to have some extra tolerance.