Sim Racing Canopy for Triple Monitors

prusaprinters

<p>Developed this sim racing canopy, as I wanted something that had a high quality OEM-like finish with zero flex.</p><p>Consists of a number of brackets angled at 45degrees for the centre, and 38 degrees for the side.</p><p>Instructions:</p><p>You will need to print a number of these joiners and brackets dependent on the size of monitor</p><p>For each 27" monitor you may have to print 6 x 100mm brackets (32.7 degree for the side monitors, and 45 degree for the center)<br>Same as above for the foam joiners, you will need up to 6 x 100mm Joiners for both monitors<br>there is an example image of how they connect together to help explain this<br>And you will need 5mm black foam (that can be purchased from any hardware / office supply store), you can buy two A2 sheets and cut with the attached template (image)</p><p>Hope you enjoy, do drop me a like, or post a make for us to see.</p><p>Printed in PETG, 10% infill.</p>