Simple Anet A8 Printer Head for E3D V6 Lasercut

thingiverse

Finaly added the Fan Duct for the Printer Head. Should fit on 3mm and 6mm Version New 3mm Version . 24.01.2016 3mm Plexi-Glas and 2x Screws with Nuts M3 60 mm long 1x Screw with Safe-Nut M3 45 mm long 2x Screw M3 20 mm for Fan Mount 8x Laces 2mm 3x Optional Spacer 35 mm long Changed Position for Y it is now -8.20mm i am Still designing the Fan i have to print it again then i will add it ! This is a simle Lasercut Printerhead for Anet A8 and the E3D V6 for all Printers that match the Anet A8. Need 6mm Plywood 2x Screws with Nuts M3 60 mm long 1x Screw with Safe-Nut M3 45 mm long 2x Screw M3 20 mm for Fan Mount 8x Laces 2mm 3x Optional Spacer 35 mm long Many ask for the Extruder. you find that on this Thing https://www.thingiverse.com/thing:2021193 Changes for Skynet3D Firmware: define X_PROBE_OFFSET_FROM_EXTRUDER -42 // -26 X offset: -left +right define Y_PROBE_OFFSET_FROM_EXTRUDER -5 // -40 Y offset: -front +behind define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. define INVERT_X_DIR true //old -> false ...this is because we swap the belt ! define INVERT_Y_DIR false define INVERT_Z_DIR true // Travel limits after homing (units are in mm) define X_MAX_POS 220 define X_MIN_POS -19 //old -33 define Y_MAX_POS 220 define Y_MIN_POS -8 //old -10 define Z_MAX_POS 240 define Z_MIN_POS 0 ---------------------------------------------------------------------------------------------------------- Feel free to Modify :-D