Simple Handheld ActionCam/ Camera Gimbal Grip 2D or 3D Hand Held

thingiverse

This is a simple gimbal grip for Action Cams, smartphones and regular cameras. You can print the parts for the most simple version, including a battery case and the holder for the gimbal, or you can add the parts for a switch, a joystick and different gimbals. This thing has the following parts: Battery case: BattCase - the lower part of the battery case, holding a 3S Lipo battery BattCapSimple - a simple version of the battery cap, providing space for the cables and a screw BattCapSwitch - a battery cap with space for a switch to turn on and off the gimbal BattCapWithJsNdSwitch - a battery cap with space for a switch to turn on and off the gimbal and for a joystick to move the camera in the gimbal ToSmartphone - a small plate to attach a smartphone to the grip, using this Smartphone Tripod holder. Then, use the Smartphone to control the camera. Gimbal part: Walkera-G2D-Mount - a plate to easily mount the Walkera G-2D gimbal on Sizable 2D Gimbal for YOUR camera What you also need: Lipo 3S battery, and a charger for it Selfie Stick for Action Cams with a 1/4" nut in its bottom 1/4" long screw to attach the battery holder to the Selfie Stick 1/4" short screw to attach a smartphone to the grip Cable from battery to gimbal - 4-Pin JST-XH 2.5mm to JST BEC 3mm - you will have to solder or crimp this Gimbal, e.g. Walkera G-2D Gimbal Optionally a 12V lighted toggle switch Optionally a "rocker gimbal joystick" See the photos for these parts, and the HowTo.pdf on how to assemble everything. Post-Printing For the joystick cap... The battery cap for switch and joystick has two support sticks in its inside, which simplify printing. You can easily break these out after printing.