Sinclair Spectrum 3 +3 Gotek drive with Large display

thingiverse

I found the 128 x 32 display very small for my seemingly old and decrepit eyes, I also didn't like that fact that I had to have my eyes horizontal with the display to see it properly. I also found the Amstrad gotek adapters on here not quite the right size for the +3 which has some weird keys on the RHS screw points. So I designed my own part around the much larger display supported by Flashfloppy firmware [https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods#oled-display] (display-type = oled-128x32-ztech) and it also is tilted 15 degrees from horizontal for easy reading. The rotary knob is on the side and it all seems to work nicely allowing more room for the display. I have used hot glue in places, and the internals are a bit of a mess.. the reason? I have spent so long on this part ( many different designs etc.) I just cant take it any more .. :-D List of parts used for this build: 2.23 inch oled display -> https://www.aliexpress.com/item/4000619925866.html?spm=a2g0s.12269583.0.0.6a743b07CDwam4 Rotary Encoder -> https://www.amazon.co.uk/gp/product/B07D356LRH/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 Piezo Transducer -> https://www.ebay.co.uk/itm/27mm-Piezo-Transducer-with-90mm-leads-Ceramic-sounder-pickup-element-pack-of-2/113766620496 Gotek Cable adapter -> https://www.ebay.co.uk/itm/KMTech-Gotek-External-Drive-Adapter-for-the-Sinclair-Spectrum-PCB-ONLY-DIY/113898102025