Sine Wave Lamp Shade [Mini Version]

prusaprinters

<p>A true sine wave profile lamp shade. Since some people have a Prusa Mini, I modified my lamp shade to make a mini version [176x175x175] of the original Sine Wave Lamp Shade [243x196x198]: <a href="https://www.prusaprinters.org/print/41599/edit">https://www.prusaprinters.org/print/41599/edit</a>.</p> <p>Ideas to Use:</p> <ol> <li>Use it as a lamp assembly with the stem from my other design: <a href="https://www.prusaprinters.org/prints/41234-curvy-lamp-shade-with-stem-assembly">https://www.prusaprinters.org/prints/41234-curvy-lamp-shade-with-stem-assembly</a></li> <li>Hang it on a wall as a pendant lamp as shown in pictures</li> <li>Flip it upside down and print out a panel to convert to a pretty trash bin. ref the Mini panel: <a href="https://www.prusaprinters.org/prints/41601-panel-to-convert-sine-wave-lamp-shade-to-trash-bin">https://www.prusaprinters.org/prints/41601-panel-to-convert-sine-wave-lamp-shade-to-trash-bin</a></li> </ol> <p>Goes with the full lamp assembly: <a href="https://www.prusaprinters.org/prints/41234-curvy-lamp-shade-with-stem-assembly">https://www.prusaprinters.org/prints/41234-curvy-lamp-shade-with-stem-assembly</a></p> <h3>Print instructions</h3><p>Print with the max layer height [0.25mm on the Prusa Mini] with 1 perimeter and 0% infill. These settings are defined in the .3mf file.</p> <p>I recommend printing with Prusament White PLA for the best translucency. An off-brand white PLA may or may not do the trick even with only 1 perimeter.</p>