Single XLR Switch fixture with a universal mount.

thingiverse

This was a scrapped design project at work that I felt it was kind of useful. Also, this shows off how I would do an part and assembly drawing for a 3D printed fixture/ mount/ bracket. Lots of things on the drawings are omitted such as part numbers and proprietary statements. This takes any XLR panel mountable switch and provides strain relief. http://www.switchcraft.com/ProductSummary.aspx?Parent=1115 Could house any .375" OD cable. Hardware: 2X Screws #4-40 x 0.5 PNH 2x screws #4-40 x 0.5 82deg FLH 4x heat inserts #4-40 x ~.240 (can use smaller or larger length inserts) 1x zip tie for cable strain relief 2x labels sized 1.25 x 0.25 (if desired) 1x label sized 1 x 0.5 for labeling what the switch does. I.e. power supply remote switch The hex slots are useful for any #8-xx nut and presses in flush. Recommend 4 matching #8 screws, nuts, and washers for stable mounting. The slots are used for more of a universal mounting option, but it doesn't cover every case.