Sith Holocron

prusaprinters

<p>This is a Sith Holocron!<br>Print this Holocron to uncover the darkest secrets of the Sith Order!</p><p>It also looks great on your desk next to your <a href="https://www.prusaprinters.org/prints/51094-jedi-holocron-pen-holder">Jedi Holocron</a>!&nbsp;</p><p>You can even use it as a desk lamp, with the help of some LEDs!</p><h3>Print Instructions</h3><h4>EXECUTE ORDER 66</h4><p>&nbsp;</p><h4>Printing</h4><p>Position the model with the bottom opening facing the build plate.</p><p>The model is currently too big to fit on your desk. I printed mine at 25% so that it could be proportional to the <a href="https://www.prusaprinters.org/prints/51094-jedi-holocron-pen-holder">Jedi Holocron</a>!</p><p>Print at FINE settings<br>I printed mine at 0.15 layer height.</p><p>Use 20% infill and print at 40 mm/s<br>I printed mine at 40 mm/s, although I think slower is better for this print.</p><p>I printed mine using TRANSLUCENT RED filament, in order to be able to shine a light under it. If you don't intend to use it as a lamp, I suggest you print it in NORMAL RED filament to skip part of the painting process.</p><h4>Painting&nbsp;</h4><p>For the painting process, I just passed a few coats of GOLD paint on the outer parts of the print. After it dried, I sprayed the print with a clear coat of spray lacquer to prevent the paint from coming off.</p><p>*I just had to go over the print with Gold paint because I had already printed it with Translucent Red filament. If you are not printing with such colors, please adjust accordingly!</p><h4>Lamp</h4><p>If you want to use it as a lamp, you can simply insert a few red LEDs and a small battery on the bottom hole!</p>