Skeleton 3d Print Bed Platform

thingiverse

This is a print bed bracket for the Skeleton-3d. This allows you to clip a sheet of glass to a spring-mounted platform... this is needed especially if you don't have a PCB bed heater to clip onto. Also, if you're looking into attaching a 100x100mm silicone pad to your glass... then I recommend editing the bracket's SCAD to remove the grid. It should be out of the way and the heating pad should clear the platform! Currently I'm using this with PLA on a PEI sheet that I cut with a box cutter. Works okay so far. Mounted on a 4.5"x4.5" glass sheet I got from Lowes. The corner brackets allow you to have a nut trap to hold it still while you adjust the bed from above with a screw driver. This wraps around the corners of the wood piece that you cut and drill for the print bed. Edit the SCAD file to the appropriate thickness of the wood plank that you used. Enjoy! I hope this is useful to some of you!!! Print Settings Printer Brand: RepRap Printer: Prusa Air 2 Rafts: No Supports: No Notes: If you're using ABS, please accommodate for shrinkage and warping... so add a raft if need be. This is going to be large and flat.