SKR 1.3 / SKR 1.4 / SKR 2 Din Rail Mount (35mm)
thingiverse
**Update:** Since there can be small variations in 35mm DIN rail widths and printer tolerances I've included a range of clamp sizes. My rail measures 35.24mm and the 36mm ones are tight but don't stress the tabs too much. Please let me know in the comments which one works best for you. Also hook the tab side first and then gently push to open the clamp until the other side clicks. Removal is the reverse. This is my minimalist DIN rail mount for an SKR 1.4. Should work for SKR 1.3 and SKR 2 as well. It's a relatively low profile snap fit design. I printed it with PLA but suspect PETG would be better if you're going to regularly pop it on/off. It's a tight fit and your board will not slip around on the rail. Use M3 x 6mm screws to mount to PCB.
With this file you will be able to print SKR 1.3 / SKR 1.4 / SKR 2 Din Rail Mount (35mm) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SKR 1.3 / SKR 1.4 / SKR 2 Din Rail Mount (35mm).