Skull with Mustache (V2) - Candy Bowl | Halloween Decoration

prusaprinters

<p>*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). &nbsp;I believe that this will print very well at smaller sizes if you want an M&amp;M or Skittles bowl for the coffee table, but I haven't tried yet. [UPDATE: tried it. 50% works great as a skittles bowl, and its kinda cute!]</p><blockquote><p><strong>Original description:&nbsp;</strong></p><p>So I was looking at the <a href="https://www.printables.com/prints/278015-realistic-skull-candy-bowl-halloween-skull-decorat"><strong>Realistic Skull Candy Bowl | Halloween Skull Decoration </strong></a><a href="https://www.printables.com/social/366413">by Thinkable</a> and my son said <strong>“</strong><i><strong>You should print that with a mustache.</strong></i><strong>”</strong> BRILLIANT!&nbsp;</p><p>Mustache design credit goes to<i> Jstander and the </i><a href="https://www.thingiverse.com/thing:2263064"><i>The Stash</i></a> model on Thingiverse.</p></blockquote><p>I printed this with 5% infill as it is still very sturdy using PLA Plus and reduced the print time by a couple of hours (I went from about 17.5 hours with 10% down to around 15.5 hours at 5%.) You may be able to get away with even less if you don’t have kids trying to stand on it or something ;)</p><p>This time I’m including a .3mf file with my settings for your convenience. The support material is easily removed and finished product looks great.&nbsp;</p><ul><li>Printed @ 95% to fit Prusa Mini</li><li>5% infill</li><li>.20mm layers</li><li>.4mm nozzle</li><li>Some supports on the underside and for the ‘stache. (See 3mf file)</li></ul><p><strong>Happy Halloween!! and please “like” this model if you like it :)</strong></p>