SL1 Platform Holder

prusaprinters

<p>EDIT: I have redesigned after getting some excellent feedback.</p> <p>V5 Part A and Part B are below.</p> <p>I have designed a build platform holder for the SL1 because I am lazy.</p> <p>It works with low to mid sized models - taller models will still need the caveman approach of holding it in place order the vat or wasting a lot of resin.</p> <p>The original model was a single object but supports killed the look of the model. I divided it into 2 models and have placed a notch on one point of the platform holder that needs to the facing the closed back of the machine fitting.</p> <p>Recommend a good strong glue and allow plenty of time to set/cure</p> <p>Design in Tinkercad as my license for Fusion 360 had lapsed.</p> <h3>Print instructions</h3><p>PLA<br/> 0.15 Speed profile<br/> 20% in fill<br/> 12.79 meters of filament<br/> Just over 3 hours to print.</p> <p>RESIN<br/> 0.05<br/> 1119 layers<br/> 55ml resin used<br/> PRUSA GREY TOUGH<br/> 4 hours 36 minutes</p>