Slim fan modules for Muldex 3D printer

prusaprinters

<p>The original part cooling fan modules of the Muldex 3D printer work very well, but they protrude from the front of the printer, so it makes it a bit difficult to enclose.</p><p>Details about the printer: <a href="https://github.com/3dprintingworld/MULDEX">https://github.com/3dprintingworld/MULDEX</a></p><p>Because enclosing the printer is only needed to print high temperature materials which don't require much cooling, I designed slim fan modules which allow easier enclosure and still provide some cooling when necessary.</p><p>Each module requires</p><ul><li>1 “4010” 24V blower fan</li><li>4 5x3mm magnets</li><li>4 M2.5x6mm screws</li><li>some glue for the magnets (I used CA glue)</li></ul><p>As the fan duct is close to the bed and nozzle, it needs a temperature resistant material. I used a PC blend.</p><p>&nbsp;</p><p>Link to the enclosure: <a href="https://www.prusaprinters.org/prints/73379-enclosure-for-muldex-3d-printer">https://www.prusaprinters.org/prints/73379-enclosure-for-muldex-3d-printer</a></p>