small lampshade (lamp cover)

prusaprinters

<p>This is a small lamp cover which you can print without support.<br/> You can put 2 small metal bars with screws in the lamp and use them to power your led lamp. I used a halogeen lamp (20 Watt), but this is getting to hot, and will miss form the ABS. Even with the vent holes. But a Power LED will give enough light and will not harm the ABS.<br/> I have print this in the color yellow, it adds a nice warm glow to the light.</p> <p>This lamp is powered by 12 Volt (power on rail, but you can use your own voltage.</p> <p>You can insert the powerrail on the side of the lamp and screw them tight.</p> <p>I designed this lampshade in autocad for the mac. (Not the easiest program for drawing parts for a 3d printer). After this I decided to use solidworks.</p> <h3> Instructions</h3> <p>I used 2 perimeters, 100% infill and a layer height of 0.1<br/> Added 3 mm brim to the object, and used some hairspray on the heated bed (85 degree Celsius) to make it really stick on the heated bed.</p> <p>Because I printed this with a yellow ABS (backlight) I had to use a print temperature of 245 degree Celsius.</p> Category: Replacement Parts