Small stackable storage boxes
prusaprinters
<p>I have these 6 tall Stables brand storage drawers and needed some little bins to store all my small hardware (screws, nuts, washers, heat set inserts and more) so I designed these. OriginallY I choose 50mm x 50mm x 35mm but I could only fit 4 across the drawer, it was extremely close to fitting 5 across so I reduced the size X&Y by 2% so now they are around 49mm x 49mm x 35mm.</p><p>I designed a 1x1 unit and also a 1x2 unit (and they will stack either way) I also designed a single divider (to go from corner to corner) and an X shaped divider as well. </p><p>I then designed a little glue in label holder (if you want to use) and it's slightly sticky as to remain stackable it must go at least 2mm inside. I put some super glue on one, placed in just shy of the top and and laying on it's side, then I took another box and push it in (stack it but on it's side) this makes sure the label holder is in a perfect amount to still allow stacking. It's just wide enough for the common ¼" wide Dymo type labels to be added to it.</p><p>The way I designed the bottom of the box there should be no need for support even though there is an overhang (it's at a gradual angle).</p><p>Enjoy!</p>
With this file you will be able to print Small stackable storage boxes with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Small stackable storage boxes.