Smart Nanoleaf Replica

thingiverse

# 3D-Printed DIY Nanoleafs (**NEW UPDATE**)  # NEW: Setup Tutorial for Beginners ## 01.02.2020, Native Alexa Update - **NodeRED** part is now **DEPRECATED** - The Nanoleaf Replica allows now for **NATIVE** Alexa support without the need of an extra Raspberry Pi. When added to the Smart Home devices in the Alexa app, the nanoleafs will appear as Phillips Hue devices. - Added Strobe Pattern - Added Sound Reactive support - Some code cleanup and new parameters to configure - New step by step installation instructions ([Software_Installation.md](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/Software_Installation.md)) I've designed and built an alternative version of the [Nanoleaf Light Panel Replica](https://www.thingiverse.com/thing:3230905) and forked a good software for controlling WS2812B LED-strips to work well with the DIY nanoleafs. **The software and detailed setup instructions can be found on [GitHub](https://github.com/NimmLor/esp8266-nanoleaf-webserver) and is compatible with *Harvahammas* Nanoleaf version.** The nanoleafs were designed in Fusion 360.  - 1x [Wemos D1 mini](http://s.click.aliexpress.com/e/_srb2XX) is recommended, but any other ESP8266 variant should work too, but it might require an additional step-down converter. - [WS2812B LED Strip **IP30**](http://s.click.aliexpress.com/e/_sUwhA1), only IP30 will fit inside the nanoleafs, I'll recommend at least 60LEDs/m - 1x [Microphone Sensor](http://s.click.aliexpress.com/e/_sYiUrz) (Optional), MAX4466 Sensor is recommended - 1x [3.3V to 5V Logic Level Shifter](http://s.click.aliexpress.com/e/_s49Saz) (optional, required if LEDs "glitch") - 1x [Female Power Jack](http://s.click.aliexpress.com/e/_sPe0RR) - 1x [5V Power Supply](http://s.click.aliexpress.com/e/_sIzXbC), Note: 100 LEDs draw around 4A - [M4\*10mm](http://s.click.aliexpress.com/e/bYUDfMek) Bolts - White PLA is recommended ###### The links above are affiliate links