SmartiPi Touch Screen Case Mounts for Lulzbot Mini

thingiverse

These are mounts for attaching a SmartiPi Touchscreen case to a Lulzbot Mini 3D printer. The case houses a Raspberry Pi 3 attached to a 7" touch screen for showing status and control with OctoPi locally at the printer. https://www.raspberrypi.org/products/raspberry-pi-3-model-b/https://www.raspberrypi.org/products/raspberry-pi-touch-display/https://smarticase.com/products/smartipi-touchhttps://octopi.octoprint.org/ The mounts are offset as far to the left as possible to avoid blocking access to the filament spool. While the mounts allow you to tilt the display all the way flat, I do not recommend doing so during printing as it would interfere with the filament. Print Settings Printer Brand: LulzBot Printer: Mini Rafts: No Supports: No Resolution: 0.20 Infill: 50% Notes: I used 3mm black PLA filament from eSUN. Post-Printing Attaching to Lulzbot Mini I used (4) black M3x10mm screws with 2mm hex head, plus M3 locking nuts to attach the mounts to the four screw holes on top of the Lulboz Mini frame..