Smartphone holder as Wireless Charger without screws - for Table and Wall - can be expandet

prusaprinters

<p>At first:<br/> If you have some problems to fit the Wireless charger in the Cover, write to me and I will make a new version for it.<br/> At the description of my Wireless charger it says:</p> <p>coil: 45mm x 2mm high<br/> circuit board: 48mm x 17mm x 3mm hight</p> <p>You should not take that description too seriously.</p> <p>About the Print:<br/> The Rotation of the print is to prevent Support. I tried to prevent screws and made it flexible. If you have some ideas, you can make your own Feet or Hand.</p> <p>Connections Feet:<br/> 2.8mm x 11.6 mm and 8mm deep (square)<br/> The triangle on both sides are 2.8mm / 2 = 1.4mm hight</p> <p>Connection Hand:<br/> 2.8mm x 10 mm and 8mm deep (square)<br/> The triangle on both sides are 2.8mm / 2 = 1.4mm hight</p> <h3>Print instructions</h3><h3>Category: Mobile Phone Print Settings</h3> <p><strong>Printer:</strong> renkforce rf100 v2</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0,2 hight; 0.4mm extruder</p> <p><strong>Infill:</strong> 20% and 100%</p> <p><strong>Filament:</strong> no idea PLA Black<br/> <strong>Notes:</strong></p> <p>Base:<br/> 20% infill is fine</p> <p>Cover:<br/> 20% infill is fine</p> <p>Hand:<br/> 20% infill is fine</p> <p>Feets:<br/> The connection Parts to the Base have to be 100% Infill. I tried with 20% and it broke at the connection. In Cura, you can select the part of the print, and print only the connection with 100% and the rest with 20%.</p>