Smartphone Stand tripod Stativ Modular Mounting System

prusaprinters

<p>This is a very practical smartphone stand / tripod, wich is perfect in many usecases.</p> <p>For assembly, you will need:<br/> 1x M5 65mm bolt<br/> 2x M5 25mm bolt<br/> 3x M5 nut</p> <p>Feel free to share your own experiences with the community!</p> <p>This smartphone stand is part of the Modular Mounting System by yyh1002 found on Thingiverse:<br/> <a href="https://www.thingiverse.com/thing:2194278">https://www.thingiverse.com/thing:2194278</a></p> <h3>Print instructions</h3><p>I printed this model in an ABS filament by Sunlu.<br/> Of course you can also use PLA here, I just chose ABS because of it's little bit better durability.</p> <p>Print results will be perfect with the 0.2mm SPEED setting in PrusaSlicer. I printed the foot of the stand in a 0.3mm Layer Height, but I wouldn't recommend it, because it resulted in some big overhangs.</p> <p>The original model on Thingiverse contains STL files for the nuts and bolts as well.<br/> I tried printing them in different print settings, and it kind of worked.<br/> But when it came to assembly, it turned out that the printed bolts don't have that kind of strength that the metal ones have, so I was not able to really tighten those screwed spots.<br/> So, better buy them in your local hardware store. The results will be much much better.</p> <p>I provide a one-print STL and 3mf File, as well as one GCODE for printing in ABS.</p>