SN42 / Sn3.5 QGR / QR 4' Arch Bar Bogies, Queensland Railways

thingiverse

Summary For: Sn42 or Sn3.5 1:64, S Scale on HO / 16.5mm track. What it is: A low detail 4' Arch Bar Bogies with 2'2" Wheels (Not up to the quality of a modern ready to run models, this is a basic outline designed more for robustness) Additional Parts Needed: 8 x 2mm "Top Hat" Bearings - 00 Gauge Romford Pin-Point Brass Bearings, Shouldered Type DW22 (Got my last lot from https://dundasmodels.co.uk/) Kadee 10.5mm wheels (HO 36" wheel set with 25.75mm axle) (I use Kadee 521 wheels) Notes: It May help to print with a brim if you can not get these small parts to stick to the build plate. Gently drill out 2mm holes in bogie frames before fitting ROMFORD bearings. I use a 2mm brass screw to mount the bogie and I bore out the middle of bolster with a 2.2mm drill bit. If you need to use the bogie with other axles lengths, then you can adjust the width in your slicer software. The final product will depend on the quality of the printer and how well you have your settings under control. I recommend using a 0.3mm Nozzle for better detail and 0.1 or 0.08mm layering. Photo is of test prototype bogies printed with 0.3mm nozzle and 0.08mm layering. Supplied as is, no support and no promises. Please leave a comment if you build this design.