Snap-fit DIN rail stand

prusaprinters

<p>I've recently started using DIN rails for prototyping my Arduino projects, and I love how a good stand gets everything up off the desk. The other stands I've seen all expect you to screw the rail to the legs but I prefer a more adaptable, screwless solution, so I designed one for myself that uses a clip-on mount, and dialed in the tolerances to make it a good, tight fit.&nbsp;</p><p>Printed in PLA with 0.3mm layer heights, 3 perimeters, and 7% infill.</p><p>For best results, print the Gripper Test piece first and try it with your DIN rails. Then dial in the print settings before printing the entire leg.</p><p>Took inspiration from the stand <a href="https://www.thingiverse.com/thing:2144527">here</a> (by <a href="https://www.thingiverse.com/philklaus/designs">Phil Klaus</a>), and the clip-mount <a href="https://www.thingiverse.com/thing:1110765">here</a> (by <a href="https://www.thingiverse.com/selphb/designs">Selphb</a>).</p>