Snowglobe Christmas tree ring

prusaprinters

<p>Personally I love this ring, but I did it more as a "will this work" than a practical print. It does work but you need to be on top of it.<br/> It makes a fun gift with the moving "snow". Needs a 16mm pad ring blank and resin to finish.</p> <p>Pictures show the ring finished with a UV resin bubble and straight off the printer with and without sand.</p> <h3>Print instructions</h3><p>Everything is printed in PLA at .20mm<br/> Filament changes at layer 2 and layer 16 (in the .gcode)<br/> The key to making this work is getting down 1 solid layer of clear PLA for the top.<br/> At layer 2 switch to green PLA.<br/> If using sand to fill stop the fan at 8 minutes remaining.<br/> Change filament to blue (or any other color) at layer 16 add sand (or other filler) at this time.<br/> Restart the fan after the sand is covered.</p> <p>Finish with a bubble of UV resin over the top (makes the top even more clear). I also use the resin to attach the print to a ring vase with a 16mm pad.</p>