Soap dispenser magnetic refill lid

prusaprinters

<p>Magnetic refill lid for common household soap dispensers. Reduces plastic waste and lets you use discount refill packs.</p> <h3>Print instructions</h3><p>Requires 4x 8mm diameter x 3mm height magnets. Print with .15mm layer height for best results.</p> <p>Insert a print pause/filament change at 3.8mm in the slicer so you can put the magnets into the top part,or just manually pause the print (the pre-sliced g-code has a filament change included).</p> <p>The magnets for the lower part can be inserted after the print is completed, just add a drop of super glue to make sure they stay put (verify the orientation of the magnets first).</p> <p>Drill a hole with a diamenter of at least 18mm into the center top of the soap cartridge. Press the lower part onto the cartridge - should be a snug fit, but if you want to make sure it stays put add a thin film of super glue onto the inner ridge beforehand. And that's it, upper part adjusts itself and stays in place by itself thanks to the magnets.</p>