Solidoodle 4 Power Supply Mount

thingiverse

These brackets can be used to mount the Solidoodle 4 power supply to a desk, wall, or whatever. The screw holes are 5mm in diameter. The power supply can be mounted at any angle, it fits in the mount upside down or the right way up. The brackets can mount an area of maximum 77.15mm x 58.20mm. I assume that all Solidoodle 4 printers come with the same power supply, my one is labelled "Replacement AC Adaptor" , model number "PA-1600-01". The Solidoodle 3 probably uses the same one above, check the picture and details above to be sure. Version 1: A simple one-piece bracket design that braces the power supply in position securely (if mounted feet-to-wall) or loosely (if mounted with feet pointing away from the wall). If braced loosely, the bracket has just enough room to slide out of the bracket - should you desire to remove it. Version 2: This design is still in progress, it is a two-piece design, allowing quick and easy removal of the power supply. Both halves of the bracket can be rotated about the screw axis, allowing the power supply to drop free. Instructions I printed at 0.4mm layer height, PLA. Any infill will work, I would recommend 30% to 100%, depending on how strong you want it.