Sony Minolta A-Mount to 1.25 inch telescope eyepiece adapter
cults3d
With this adapter you can connect any 1.25 inch eyepiece / camera to a Sony / Minolta A-Mount lens. The adapter opens up the aperture completely for maximum light. The lens should have a tripod mount, as this adapter has none. Use a M2.5 screw or similar to lock the adapter to the lens (this would be the bolt from the camera, holding the lens in place) There is no further support required and even not recommended, as the rather fragile aperture lever part would be hard to clear from the supports. The aperture lever has a small support part attached in the design, which is easy to break away. Be careful as 1.25 inch cameras may slide all through to the lens and cause damage if not properly locked! If you are looking for the similar adapter for Sony E-Mount, look here: https://www.thingiverse.com/thing:4628446
With this file you will be able to print Sony Minolta A-Mount to 1.25 inch telescope eyepiece adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Sony Minolta A-Mount to 1.25 inch telescope eyepiece adapter.