Sony Z5 Compact (With case) Docking Station

thingiverse

-----UPDATE V2 Model sizing is correct now and it works!!----------- The first print I made had 5% infill, normal walls, 0,3 layer height. This was of course not enough, while removing the dock from the print bed I already broke a few pieces off... Despite that particular print being a failure, I can now check the dimensions with the phone, to ensure the size is correct, before I attempt another print, with much better settings... -----again, use V2 this is the updated version all the sizing is correct----- This dock is meant for the Sony Z5 Compact with the original Case and cover, the original micro usb cable slides into the dock and has a tight fit. I've designed the dock in such a way, that the phone automatically centers itself over the micro usb charger cable and plugs in. NO LONGER WORK IN PROGRESS, IT WORKS VERY NICELY Also, this uses quite a bit of material 24m @ 5% infill (which is not enough, it breaks), but my friend really wanted a closed back compartment, so he could put stuff in there, like ear phones and/or pens. If someone likes this dock, I can redesign the back side, to use less material.. maybe just leave it out completely. The bottom has 2 holes @ 6mm to allow a weight to be attached. Print Settings Printer: Da Vinci Jr 1.0 Rafts: No Supports: No Resolution: Excellent (0.2 layer height) Infill: 30% Notes: Printed in PLA 0.3 layer height, with 5% infill. The thing was destroyed while removing it from the print bed. Would recommend printing at least 30% infill, Layer height 0.2, slower settings give a nicer finish.