SooCoo C30 Bicycle Helmet Extended Battery Mount
thingiverse
Here is a bicycle helmet mount for my SooCoo C30 with an extended Inland battery bank. It should fit a GoPro as well. This battery modification should allow continuous recording for over 3 hours. You will need to take the original battery casing apart, remove the battery, solder an USB female connector, put back the battery casing, and put it into the camera without the battery cover. Sorry, didn't take any pictures, but take a look at the drawing. Also, you will need to cut a small hole underneath the camera protective housing to run an USB cable from the battery to the camera. Use support only for the box with mount. The box cover can be printed without support. To secure the cover, you could bend two paper clips (see picture) or use small screws if you have them. Battery bank: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2510209.m570.l1313&_nkw=inland+battery+bank&_sacat=0
With this file you will be able to print SooCoo C30 Bicycle Helmet Extended Battery Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SooCoo C30 Bicycle Helmet Extended Battery Mount.