Spacers to mount foil assist on concave board deck - One Ocean Sports 5'10"

thingiverse

Spacers for fitting a foil assist enclosure onto a One Ocean Sports 5'10" SUP board, with a concave deck. These will flatten a section of your deck, allowing you to mount the 3M dual lock on a flat surface. On my board, only 50mm of space was available for the foil assist box, to allow the leg leash enough room to move. These spacers make the flat surface 7mm above the board in the centre. My enclosure sits over the deck pad for the front 25mm, and the 3m dual lock holds it securely for the back 50mm. You could scale the spacer in the desired direction if you have room for a bigger flat area. Print 2 of these, flat side on the print bed. PLA with 3 walls/top/bottom, and 20% infill. Mount one on each side, behind the deck pad, with a 2cm gap between the two spacers. I used Bostik ISR 70-03 glue to attach securely to my deck. Double side tape would also work.